DRIPBOX 2

,

DRIPBOX 2 kit comes with SUBDRIP 160 and MBEBOX, MBEBOX integrated battery and tank with capacity of 7.0mL. User can easy squeeze the tank and pump the appropriate Juice from the MBEBOX to SUBDRIP 160. With temperature control and high power output, user can enjoy the fun of dripping. In additional, replacement drip coil make the coil changing much easy.

MBEBOX have special software.

  • Height: 26mm
  • Diameter: 22mm
  • Weight: 30g
  • Casing: Stainless steel
  • Connection: 510 thread
  • Coil resistance: Kanthal 0.2 Ohm
  • Support both MTL and DL inhale
  • Adjustable air flow

  • Height: 84mm
  • Depth: 57mm
  • Width: 23mm
  • Casing: Zinc alloy
  • Juice capacity: 7mL
  • Display: OLED
  • Cell: replaceable Li 18650 cell X 1,at least 30A discharge
  • Charging: Micro USB port, DC5V/1000mA
  • Power output: 5W to 80W
  • Resistance wire: 0.1 Ohm to 2.5 Ohm
  • TC range: 100 °C to 315°C or 200°F to 600°F
  • Resistance wire: 0.1 Ohm to 2.5 Ohm

  • SUBDRIP X 1
  • DRIPBOX 2 X 1
  • Replacement Drip coil X 1
  • Accessory pack
  • Manual
  • USB cable

DRIPEZ

, ,

The DRIPEZ have special software. The dripping atomizer integrated with the battery, easy, convenient and clean to use, which avoid opening tank cover for a long time or frequently for frequently dripping requirement.

  • OLED Display
  • Micro USB
  • Comes in Black/ Silver
  • Drip tip: POM

  • Casing: Zinc Alloy
  • Height: 57.5mm
  • Length: 39mm
  • Width: 31mm
  • Weight: 270g (exclude 18650 cell)
  • Output watt: 5W to 80W
  • Charging: Micro USB, DC 5V at 1A
  • Resistance: 0.1 – 2.5Ohm

  • DRIPEZ X 1 (Direct lung inhale)
  • Push RBA 0.3 Ohm X 1 (Mouth to lung inhale)
  • Drip coil 0.2 Ohm X 1
  • Second Juice pomp X 1
  • Manual
  • USB cable

WAKIZASHI

,

KATANA

,

The SUBOX Kit

is Kangertech’s first premium package. In the package, you get Kangertech’s Subtank Mini along with Kanger’s newest battery mod: The KBOX Mini. The kit comes in both black and white editions whichever rocks your boat. Check out the tabs on the right and check the specs for yourself.

  • OLED Display
  • Micro USB
  • 510 Threaded Connection
  • Comes in Black/ White
  • Comes with 18650 Battery pre-installed

  • Organic Cotton from Japan
  • 510 threaded connection
  • Nex-Gen Pyrex Glass
  • Durable Structure
  • Upgraded Airflow System

  • Casing: Zinc Alloy
  • Display: OLED
  • Height: 82mm
  • Length: 39mm
  • Width: 22mm
  • Weight: 110g (exclude 18650 cell)
  • Output watt: 7W to 50W with 0.1W  increment
  • Charging: Micro USB, DC 5V at 1A
  • Cell: Lithium 18650, 3.7V (must discharge over 20A)
  • Suitable atomizer: 0.3 Ohm to 1.6 Ohm (above 1.6 Ohm, output cannot reach 50W)

  • SUBTANK Mini+ KBOX Mini (Black kit/White Kit)
  • OCC 0.5 X 1 (Direct lung inhale)
  • OCC 1.5 X 1 (Mouth to lung inhale)
  • Mini RBA Plus X 1
  • RBA 0.5 Ohm coil X 2
  • cotton sheet
  • Screw driver
  • 2pcs RBA desk screw, 2pcs RBA cober screw
  • Authenticity code using guide
  • Manual
  • OCC using guide
  • USB cable

TOGO MINI 2.0

,

  • Length: 44mm
  • Height: 76.5mm
  • Width: 22.5mm
  • Weight: 140g
  • Capacity: 1.9mL
  • Resistance: above 0.15 Ohm

  • New symmetrical air flow design
  • Slim design with 1.9 mL capacity
  • CLOCC coils
  • Durable finish, excellent hand feel
  • 1600 mAh build in Li-battery
  • 5 LED battery indicator
  • Replaceable Pyres glass

  • 1 x TOGO MINI 2.0
  • 1 x CLOCC NiCr 1.5 Ohm coil
  • 1 x Set of seal ring
  • 1 x Replacement Pyrex glass
  • 1 x Manual

E-NUT

,

TOGO

,

K-AIR

,

TOGO MINI

,

  • Length: 44mm
  • Height: 76.5mm
  • Width: 22.5mm
  • Weight: 140g
  • Capacity: 3.8mL
  • Resistance: above 0.15 Ohm

  • New symmetrical air flow design
  • Slim design with 1.9 mL capacity
  • CLOCC coils
  • Durable finish, excellent hand feel
  • 1600 mAh build in Li-battery
  • 5 LED battery indicator
  • Replaceable Pyres glass

  • 1 x TOGO MINI
  • 1 x CLOCC SS 0.5 Ohm coil
  • 1 x CLOCC NiCr 1.5 Ohm coil
  • 1 x Set of seal ring
  • 1 x Replacement Pyrex glass
  • 1 x Manual

k-kiss

,

  • Height: 131mm
  • Width: 40mm
  • Weight: 234g
  • Capacity: 4.5mL
  • Resistance: above 0.15 Ohm

  • Color: Black/Red/Orange/Wood grain
  • Battery: Built-in 6500mAh
  • Output: Full power output
  • Charging: Micro USB/DC 5V 1000mA

  • 1 x k-kiss
  • 1 x SSOCC SS 0.2 Ohm coil
  • 1 x Micro USB cable
  • 1 x Manual
  • 1 x Set of seal ring
  • 1 x Pyrex glass

K-PIN

,

K-STICK

,

ENEW NANO KIT

,

ENEW Nano Kit

is Kangertech most update series of closed tank. Its special designed for the disposable vaping with best sensation. The pre-filled closed tank let the end user convenience to choose their favourite flavor.  ENEW Nano come with built in Li battery of 1200mAH.

  • 5 battery indicators
  • 168 Threaded Connection
  • Comes in Black/White /Pink
  • Built in 1200mAH Li battery
  • Micro USB port

  • Organic Cotton from Japan
  • 168 threaded connection
  • Pre-filled closed tank
  • 2mL at 0.8 Ohm

  • DTANK Smart 0.8 Ohm
  • ENEW Nano Mod
  • Manual
  • USB cable

FMOD KIT

,

FMOD Kit

is Kangertech most update closed tank. Its special designed for the disposable vaping with best  sensation.

Slim size make it most protable daily using.

  • Micro USB
  • 168 Threaded Connection
  • Comes in Black/ Silver/ Pink
  • 650 mAH build in battery

  • 1.8 mL/ 0.8 Ohm
  • Pre fill closed tank
  • Organic Cotton from Japan
  • 168 threaded connection

  • FMOD X 1
  • DTANK Smart Tank X 1
  • Manual
  • USB cable

ENEW MOD KIT

,

ENEW mod use with DTANK.

E-liquid is embeded in atomizer, which cannot be refilled after used up. End user need to change DTANK directly after e-liquid used up.

  • Height: 82mm
  • Diameter: 22mm
  • Color: Black/Silver
  • Display: LED
  • Connection: 168 thread
  • Battery Capacity: 20600/2300mAh
  • Charging: Micro USB charge port, DC 5V/1000mAh(max)

  • Height: 37.9mm
  • Diameter: 22mm
  • Capacity: 2ml
  • Connection: 168 thread

  • ENEW MOD X 1
  • DTANK 2 X 1 (Mouth to lung inhale)
  • Manual
  • USB cable

ENEW KIT

,

ENEW kit

is Kangertech most update closed tank device. It comes with pre-filled DTANK 5 and ENEW battery. Its special designed for the disposable vaping with best sensation. The pre-filled closed tank let the end user convenience to choose their favourite flavor.

 

  • Height: 46.9mm
  • Diamater: 23mm
  • Weight: 16.5g
  • Capacity: 5mL
  • Resistance: 0.4 Ohm

  • Height: 82mm
  • Length: 48mm
  • Width: 26mm
  • Weight: 192.5g( include e-liquid)
  • Mod material: Zinc alloy
  • Color: Black/White/Silver
  • Display: 5 lED battery indicators
  • Connection: 168 thread
  • Built-in battery 2600 mAh
  • Charging: Micro USB charge port, input voltage DC 5V/1000mAh(max)

  • DTANK 5 X 1
  • ENEW X 1
  • Manual
  • USB cable

ENEW NANO BOX

,

ENEW Nano works together with DTANK Nano (closed tank with different juice flavor).

It has 5 display indicators to show the built-in battery capacity. The slim size and disposable tank design is much easier for using.

  • LED Display
  • Micro USB
  • Built-in battery 1200mAh
  • Resistance wire: ≥0.4 Ohm

  • Casing: Zinc Alloy
  • Display: LED
  • Height: 70mm
  • Length: 36.5mm
  • Width: 18.5mm
  • Weight: 50g

  • ENEW NANO X 1
  • DTANK NANO X 1
  • Manual
  • USB cable

ENEW MOD

,

ENEW mod is built-in battery 2300mAh, design with 168 thread, use with DTANK 2(Cloased tank). E-liquid is embeded in atomizer, which cannot be refilled after used up. End user need to change DTANK directly after e-liquid used up.

  • LED Display
  • Micro USB
  • 168 threaded connection
  • Comes in Black/ Silver
  • Built-in battery 2300mAh

  • Casing: Stainless Steel
  • Height: 102mm
  • Diameter: 22mm

  • ENEW MOD X 1 (Direct lung inhale)
  • Manual
  • USB cable

ENEW

,

ENEW need to use with DTANK(Closed tank).

  • 5 LED battery level
  • Micro USB
  • 168 Threaded Connection
  • Comes in Black/ White/Silver
  • Built-in battery 2600mAh
  • Resistance: 0.4 – 3.0 Ohm

  • Casing: Zinc Alloy
  • Display: LED
  • Height: 82mm
  • Length: 48mm
  • Width: 26mm
  • Weight: 176g
  • Charging: Micro USB, DC 5V at 1A

  • ENEW X 1
  • Manual
  • USB cable

SUBVOD-C KIT

, ,

SUBVOD -C Kit

is Kangertech ‘s pen type device which come with Protank 6 and SUBVOD battery. It is a top filled tank which use the SSOCC coil. When connect the tank toward the battery, end user may pull out the coil from the tank which much simplify the coil changing.

  • Micro USB
  • 510 Threaded Connection
  • Build in 1300mAH Li battery

  • Organic Cotton from Japan
  • 510 threaded connection
  • Pyrex Glass
  • Top filled tank
  • Diameter 18.5mm

  • Height: 130mm
  • Diameter: 18.5mm
  • Weight: 96g
  • Tank: 2.8mL
  • Battery: build in 1300mAH
  • Charging: Micro USB, DC 5V at 1A
  • Colour: Black/White/Silver/Rose Gold/Grey Silver
  • Suitable atomizer: SSOCC above 0.4 Ohm

  • Protank 6
  • SUBVOD
  • SSOCC stainless steel coil 0.5 Ohm
  • Manual
  • USB cable

SUBOX MINI-C KIT

, ,

SUBOX Mini-C Kit

is a simplify model which come with Protank 5 and SUBOX Mini -C. It is a top filled tank which use the SSOCC coil. When connect the tank toward the battery, end user may pull out the coil from the tank which much simplify the coil changing.

  • OLED Display
  • Micro USB port
  • 510 Threaded Connection
  • Replaceable 18650 cell
  • 50W output

  • Organic Cotton from Japan
  • 510 threaded connection
  • Pyrex Glass
  • 3mL capacity
  • Used SSOCC
  • symmetrical air flow

  • Casing: Zinc Alloy
  • Display: OLED
  • Height: 82mm
  • Length: 39mm
  • Width: 22mm
  • Weight: 149g (exclude 18650 cell)
  • Output watt: 7W to 50W with 0.1W  increment
  • Charging: Micro USB, DC 5V at 1A
  • Cell: Lithium 18650, 3.7V (must discharge over 20A)
  • Suitable atomizer: SSOCC 0.3 Ohm to 1.6 Ohm (above 1.6 Ohm, output cannot reach 50W)
  • Colour: Black/White/Silver/Rose Gold/Grey Silver

  • Protank 5
  • KBOX Mini-C
  • SSOCC 0.5 Ohm
  • Manual
  • USB cable

PANGU KIT

,

PANGU Kit integrated the tank and battery together. It has built-in Li cell and with adjustable the juice holes channel. End user may adjust the juice holes size to fit their best MTL or DL setting

  • Integrated device
  • Pyrex Glass
  • Drip tip: POM
  • Built-in Li 2500mAh
  • Adjustable juice hole size
  • Comes in Black/ White/Silver

  • Display: LED
  • Height: 128mm
  • Diameter: 22mm
  • Weight: 117g
  • Charging: Micro USB, DC 5V at 1A
  • Atomizer coil resistance: 0.15Ohm above

  • PANGU KIT X 1
  • PGOCC(SS316L 0.5 Ohm) X 1
  • PGOCC(NiCr 1.0 Ohm) X 1
  • Spare Pyrex glass X 1
  • Set of seal ring X 1
  • Micro USB cable
  • Manual

JUPPI KIT

,

JUPPI Kit

In the package, you get Kangertech Juppi Tank and Juppi Box. Juppi tank uses the Juppi coil which is easy for end user to rebuild their coil. While the Juppi Box have both the TC and power mode which is easy to use.

  • Height: 85mm
  • Length: 48mm
  • Width: 22mm
  • Weight: 135g
  • Material: Stainless Steel
  • Color: Black/White/Silver
  • Connection:Spring loaded 510
  • Output: 7-75W
  • Resistance:0.1 – 2.5Ohm
  • Charging: Micro USB charge port, DC 5V/1000mAh(max)

  • Easy rewick Juppi coil
  • Organic Cotton from Japan
  • 510 threaded connection
  • Pyrex Glass
  • Durable Structure
  • Symmetrical Airflow

  • Juppi BOX X 1
  • Juppi tank X 1
  • USB cable X 1
  • manual X 1

JUPPI BOX

,

Juppi box comes with black/white/silver, output is 7-75W, and support temperature control for 100℃ to 300℃ and then 200℉ to 600℉ with achieve wattage range setting.

  • material: Stainless Steel
  • Color: Black/White/Silver
  • Connection: Spring loaded 510
  • Output: 7-75W
  • Resistance: 0.1-2.5Ohm
  • Charging: Micro USB, DC 5V/1000mAh(max)

  • Display: OLED
  • Height: 85mm
  • Length: 48mm
  • Width: 22mm
  • Weight: 135g

  • Juppi BOX X 1
  • Manual
  • USB cable

K1 BOX

,

K1 BOX is the kangertech first stabilized wood device.

Features: DNA 75; OLED display; Firmware upgradable; Deluxe stabilized wood casing; Replaceable cells; Temperature control.

  • DNA 75O
  • OLED Display
  • Firmware upgradeable
  • Deluxe stabilized wood casing
  • Replaceable cell
  • Temperature control

  • Casing: Unique stabilized wood
  • Display: OLED
  • Height: 90mm
  • Length: 42mm
  • Width: 22mm
  • Weight: 125g (exclude 18650 cell)
  • Output watt: 1W to 75W with 0.1W  increment
  • Charging: Micro USB, DC 5V at 1.5A
  • Cell: Lithium 18650, 3.7V (must discharge over 20A)

  • K1 BOX X 1 (Direct lung inhale)
  • Manual
  • USB cable

CUPTI 2

,

CUPTI 2 is new version of CUPTI.

Features:

1. 5.0 ML;
2. For MTL and DL;
3. Durable surface finish;
4. DIY Temp and Watt curve;
5. CLOCC/CLRBA(optional);
6. Have special software;
7. A second adapter for other tanks.

  • 5.0 ML
  • For MTL and DL
  • Durable surface finish
  • DIY Temp and Watt curve
  • CLOCC/CLRBA(optional)
  • Upgradable Firmware(80→100W)
  • A second adapter for other tanks

  • Casing: Zinc Alloy
  • Display: OLED
  • Height: 84mm
  • Length: 51.5mm
  • Width: 42.5mm
  • Weight: 330g (exclude 18650 cell)
  • Output watt: 5W to 80W with 0.1W  increment
  • Charging: Micro USB, DC 5V at 1.5A
  • Suitable atomizer: 0.1 – 2.5 Ohm

  • CUPTI 2 X 1)
  • CLOCC(SS) 0.5 X 1
  • Manual
  • USB cable

KONE

,

KONE use with PANGU tank, the features: 1. top filling;
2. Built-in battery 3000mAh;
3. Support 0.1 Ohm or higher;
4. 5 LED battery level display;
5. Short circuit protection.

  • PANGU tank(3.5mL)
  • Top filling
  • Support 0.1 Ohm or higher
  • 5 LEDs Display
  • Micro USB
  • Spring loaded 510
  • Comes in Black/ White/Silver
  • Built-in high-capacity battery
  • Short circuit protection
  • 5 LED battery level display

  • Heigh: 90mm
  • Weigh: 23mm
  • Length: 44mm
  • Weight: 200g
  • Charging: Micro USB, DC 5V at 1A
  • Battery: Built-in 203050/3000mAh battery
  • Resistance: 0.1 Ohm above

  • PANGU Tank X 1
  • KBOX Smart Mod X 1
  • PGOCC(SUS316L 0.5Ohm) X 1
  • PGOCC(NiCr 1.5Ohm) X 1
  • Pyrex glass X 1
  • Set of Seal Ring X 1
  • Manual X 1

TOP EVOD with Japanese eLiquid

,

TOP EVOD

  • TOP EVOD Kit X 1
  • Japanese eliquid X 1
  • Manual
  • USB cable

CUPTI

,

CUPTI features: 5.0ML; All in one device; Leak-free; For MTL and DL; 75W output; CLRBA(optional); Replaceable 18650; Replaceable Pyrex glass; Temperature Control; Durable surface furinshing.

  • 5.0ML
  • All in one device
  • Leak-free
  • For MTL and DL
  • 75W output
  • CLRBA(optional)
  • Replaceable 18650
  • Replaceable Pyrex glass
  • Temperature Control
  • Durable surface furinshing

  • CLOCC(SS 0.5ohm) × 1
  • CLOCC(NiCr 1.5ohm) × 1
  • USB cable × 1
  • Manual × 1